swactor/crates/iroh-driver/src/iroh_driver.rs

//! iroh-based P2P network transport bridge for the actorized distribution
//! protocol (the SWIM / registry / metadata / directory actors).
//!
//! Uses iroh's QUIC-based peer-to-peer transport with built-in TLS, NAT
//! hole-punching, and relay server fallback.
//!
//! The driver runs on a caller-supplied swactor [`EngineHandle`] — the single
//! engine that owns the node's Tokio substrate. All accepts, reads, dials,
//! writes, retries, and teardown are scheduled through that handle; the driver
//! stores no raw Tokio handle and performs no ambient-runtime detection
//! (ENGINE_SPEC.md §7). Construct with
//! [`IrohDriver::with_engine`].

use parking_lot::Mutex;
use std::collections::{HashMap, HashSet};
use std::net::{IpAddr, SocketAddr};
use std::sync::Arc;
use std::sync::atomic::{AtomicU64, Ordering};
use std::time::{Duration, Instant};

use iroh::endpoint::Connection;
use iroh::{Endpoint, EndpointAddr, PublicKey, RelayMode, SecretKey};
use swactor_engine::{Capabilities, EngineHandle};

use distribution::crypto::{Keypair, KeypairExt};
use distribution::messages::*;
use distribution::node::DistributedNodeConfig;
use distribution::peer_auth::PeerAllowList;
use distribution::snapshot::DistributionNodeSnapshot;
use distribution::swim::actor::SwimIn;
use distribution::transport_bridge::{OutFrame, Outbox, RelayMirror, RouteView, peer_addr};
use distribution::types::NodeId;

use crate::datastream_transport::{
    DATASTREAM_ALPN, DatastreamQuicHeader, DatastreamQuicRead, read_events_from_stream,
    spawn_subscription_writer,
};
use crate::edge_transport::{
    EDGE_ALPN, EdgeSendHandle, EdgeTransportEvent, spawn_edge_recv_pump,
    spawn_edge_send_pump as spawn_edge_sender_task,
};
use swactor::actor::ActorAddress;
use swactor::runtime::Runtime;
use swactor_transport::CodecRegistry;

/// ALPN protocol identifier for SWIM messages over iroh.
const ALPN: &[u8] = b"swactor/swim/1";

// ─── Config ─────────────────────────────────────────────────────────────────

/// Configuration for the iroh-based driver.
pub struct IrohDriverConfig {
    /// Secret key for the iroh endpoint.
    /// If `None`, a fresh key is generated (node gets a random identity).
    pub secret_key: Option<SecretKey>,
    /// Relay server configuration.
    /// Defaults to `RelayMode::Default` (n0 production relays).
    pub relay_mode: RelayMode,
    /// Protocol-layer configuration.
    pub node: DistributedNodeConfig,
    /// Optional peer allow-list. If provided, only allowed peers can connect.
    pub peer_auth: Option<Arc<Mutex<PeerAllowList>>>,
    /// Additional ALPNs to register beyond SWIM. Opaque to the driver.
    pub additional_alpns: Vec<Vec<u8>>,
}

// ─── Pending join result ────────────────────────────────────────────────────

/// Result of a background join attempt, collected during `recv()`.
struct JoinResult {
    node_id: NodeId,
    conn: Connection,
}

#[derive(Clone)]
struct CachedConnection {
    generation: u64,
    conn: Connection,
}

#[derive(Clone, Copy, Debug, PartialEq, Eq)]
struct FailedConnection {
    node_id: NodeId,
    generation: u64,
}

// ─── LAN IP Discovery ──────────────────────────────────────────────────────

/// How a peer is currently reachable, derived from iroh's `RemoteInfo`.
/// Strings on the wire (serde) rather than newtypes — iroh's own vocabulary
/// evolves and we want the format to be forgiving.
#[derive(Debug, Clone, Copy, PartialEq, Eq, serde::Serialize, serde::Deserialize)]
pub enum ConnType {
    Direct,
    Relay,
    Mixed,
    None,
}

/// Classify a peer's active connection type from its iroh `RemoteInfo`:
/// `Direct` (an active IP path), `Relay` (active relay path), `Mixed` (both),
/// or `None` (known peer but no active path).
pub fn conn_type_of(info: &iroh::endpoint::RemoteInfo) -> ConnType {
    let mut active_direct = false;
    let mut active_relay = false;
    for addr_info in info.addrs() {
        let is_active = format!("{:?}", addr_info.usage()).to_lowercase() == "active";
        match addr_info.addr() {
            iroh::TransportAddr::Ip(_) => {
                if is_active {
                    active_direct = true;
                }
            }
            iroh::TransportAddr::Relay(_) => {
                if is_active {
                    active_relay = true;
                }
            }
            _ => {}
        }
    }
    match (active_direct, active_relay) {
        (true, true) => ConnType::Mixed,
        (true, false) => ConnType::Direct,
        (false, true) => ConnType::Relay,
        // We've heard of the peer but no addr is in active use.
        (false, false) => ConnType::None,
    }
}

/// Discover all non-loopback LAN IP addresses on this host.
///
/// Uses UDP socket tricks to multiple broadcast destinations to find
/// addresses across different subnets. Also parses `/proc/net/if_inet6`
/// for IPv6 addresses on Linux.
pub fn discover_lan_ips() -> Vec<IpAddr> {
    let mut ips = Vec::new();
    let mut seen = std::collections::HashSet::new();

    // UDP socket trick: connect to a broadcast-ish address, read local_addr
    let targets: &[&str] = &["10.255.255.255:1", "192.168.255.255:1", "172.31.255.255:1"];
    for target in targets {
        if let Ok(sock) = std::net::UdpSocket::bind("0.0.0.0:0") {
            if sock.connect(target).is_ok() {
                if let Ok(local) = sock.local_addr() {
                    let ip = local.ip();
                    if !ip.is_loopback() && !ip.is_unspecified() && seen.insert(ip) {
                        ips.push(ip);
                    }
                }
            }
        }
    }

    // Parse /proc/net/if_inet6 for IPv6 addresses (Linux only)
    if let Ok(contents) = std::fs::read_to_string("/proc/net/if_inet6") {
        for line in contents.lines() {
            let parts: Vec<&str> = line.split_whitespace().collect();
            if parts.len() >= 6 {
                let hex = parts[0];
                if hex.len() == 32 {
                    let mut bytes = [0u8; 16];
                    let mut valid = true;
                    for i in 0..16 {
                        match u8::from_str_radix(&hex[i * 2..i * 2 + 2], 16) {
                            Ok(b) => bytes[i] = b,
                            Err(_) => {
                                valid = false;
                                break;
                            }
                        }
                    }
                    if valid {
                        let ip = IpAddr::V6(std::net::Ipv6Addr::from(bytes));
                        if !ip.is_loopback() && !ip.is_unspecified() {
                            // Skip link-local (fe80::)
                            if let IpAddr::V6(v6) = ip {
                                if (v6.segments()[0] & 0xffc0) == 0xfe80 {
                                    continue;
                                }
                            }
                            if seen.insert(ip) {
                                ips.push(ip);
                            }
                        }
                    }
                }
            }
        }
    }

    ips
}

// ─── Join Status ───────────────────────────────────────────────────────────

/// Phase of a join attempt.
#[derive(Debug, Clone)]
pub enum JoinPhase {
    Connecting { attempt: u32, max_attempts: u32 },
    Sending { attempt: u32, max_attempts: u32 },
    Sent,
    Failed { error: String },
}

/// Real-time status of a join attempt to a specific peer.
#[derive(Debug, Clone)]
pub struct JoinStatus {
    pub phase: JoinPhase,
    pub has_relay: bool,
    pub has_direct: bool,
    pub direct_addr_count: usize,
    pub updated_at: Instant,
}

// ─── Driver ─────────────────────────────────────────────────────────────────

/// Cloneable logical datastream publisher transport. It hides the raw iroh
/// endpoint and Tokio task handle from callers while leaving datastream
/// subscription/catalog semantics in the datastream crate.
#[derive(Clone)]
pub struct DatastreamPublishHandle {
    engine: EngineHandle,
    endpoint: Endpoint,
}

impl DatastreamPublishHandle {
    pub fn publish_subscription(
        &self,
        peer: EndpointAddr,
        header: DatastreamQuicHeader,
        subscription: datastream::DatastreamSubscription,
        idle_sleep: Duration,
    ) {
        spawn_subscription_writer(
            &self.engine,
            self.endpoint.clone(),
            peer,
            header,
            subscription,
            idle_sleep,
        );
    }
}

/// Mutable connection state consolidated under a single lock: the cached
/// connections, the generation counter for generation-aware eviction, and
/// the per-peer relay URLs learned from join seeds. Held inside an
/// `Arc<Mutex<ConnCache>>` shared between the driver and the engine-hosted
/// adapter pump so both can progress connections without `&mut self`.
struct ConnCache {
    connections: HashMap<NodeId, CachedConnection>,
    next_generation: u64,
    peer_relay_urls: HashMap<NodeId, iroh::RelayUrl>,
}

/// iroh P2P network transport bridge.
///
/// Bridges the actorized distribution protocol (running on a swactor runtime)
/// to iroh's async QUIC transport. Runs on a caller-supplied swactor
/// [`EngineHandle`] — the single engine that owns the node's Tokio substrate.
/// All accepts, reads, dials, writes, retries, and adapter progression
/// (actor-bridge, datastream, edge) are scheduled through that handle as
/// engine-hosted work via [`Self::install_actor_bridge_pump`]; the driver stores
/// no raw Tokio handle. Endpoint construction and [`Self::shutdown`] are hosted
/// as engine tasks, never requiring the caller to enter or possess the raw
/// substrate runtime; the async loop uses [`Self::close`] for teardown.
pub struct IrohDriver {
    /// This node's signing identity (reconstructed from the iroh endpoint
    /// secret). Signs `DirectoryEntry` claims for locally-spawned actors
    /// ([`Self::register_actor`]) and is the source of [`Self::node_id`].
    keypair: Keypair,
    endpoint: Endpoint,
    /// The swactor engine that owns the node's Tokio substrate. All background
    /// iroh work is scheduled through this handle; it never exposes the raw
    /// Tokio runtime (ENGINE_SPEC.md §7).
    engine: EngineHandle,
    conns: Arc<Mutex<ConnCache>>,
    peer_auth: Option<Arc<Mutex<PeerAllowList>>>,
    /// Collects connections from background join tasks.
    pending_joins: Arc<Mutex<Vec<JoinResult>>>,
    /// Peers with a background dial in flight. A cache-miss send checks this
    /// so it starts at most one dial per peer instead of blocking the SWIM
    /// pump on a synchronous 30s dial (fatal to failure detection: a probe to
    /// a dead peer would otherwise freeze the whole node for the dial budget).
    dialing: Arc<Mutex<HashSet<NodeId>>>,
    /// Connections accepted by the background accept loop (SWIM ALPN).
    accepted_conns: Arc<Mutex<Vec<(NodeId, Connection)>>>,
    /// Connections accepted on non-SWIM ALPNs before driver-owned adapters claim them.
    other_accepted_conns: Arc<Mutex<Vec<(NodeId, Vec<u8>, Connection)>>>,
    /// Completed datastream QUIC reads from driver-owned DATASTREAM_ALPN adapters.
    datastream_reads: Arc<Mutex<Vec<DatastreamQuicRead>>>,
    /// Logical edge events emitted by driver-owned EDGE_ALPN byte pumps.
    edge_events: Arc<Mutex<Vec<EdgeTransportEvent>>>,
    next_edge_stream_group: Arc<AtomicU64>,
    /// Frames read by per-connection reader tasks, drained by the engine-hosted
    /// adapter pump ([`Self::install_actor_bridge_pump`]). This decouples network
    /// reads from the state machine. Each entry is `(dest, type_tag, payload,
    /// from)` — `dest` is the destination actor address carried on the wire
    /// (`DIRECTORY.md` §5).
    incoming: Arc<Mutex<Vec<(ActorAddress, String, Vec<u8>, NodeId)>>>,
    /// Connections whose fire-and-forget send failed; evicted (and re-dialed)
    /// on the next `recv()`. Populated by the spawned send tasks.
    evict: Arc<Mutex<Vec<FailedConnection>>>,
    /// Real-time join status for each peer being joined.
    join_statuses: Arc<Mutex<HashMap<NodeId, JoinStatus>>>,
    /// Relay URL configured or exposed by the bound endpoint, if any.
    relay_url: Option<iroh::RelayUrl>,
    /// Actor-bridge wiring, installed via [`Self::enable_actor_bridge`]. When
    /// present, the engine-hosted adapter pump decodes inbound frames into actor
    /// messages and writes actor-produced outbound frames drained from the shared
    /// outbox. Installed in production; `None` only in harnesses that route
    /// frames by hand.
    actor_bridge: Option<Arc<ActorBridge>>,
}

/// State the driver needs to shuttle frames between iroh and the swactor runtime
/// once the protocol runs as actors (see [`IrohDriver::enable_actor_bridge`]).
struct ActorBridge {
    /// The swactor runtime, for `deliver_raw` of decoded inbound + `SendFailed`.
    rt: Arc<Runtime>,
    /// Actor codec: wire `type_tag` → the actor `Incoming` variant and back.
    codec: Arc<CodecRegistry>,
    /// `type_tag` → the local actor mailbox that owns it (ingress routing table).
    routes: HashMap<String, ActorAddress>,
    /// The SwimActor's address, for delivering `SendFailed{to}` on a write failure.
    swim_addr: ActorAddress,
    /// This node's own peer-mailbox address (`peer_addr(self)`). A frame whose wire
    /// `dest` equals this was gossip addressed to the node (route it by tag);
    /// anything else is a §5 application message addressed to a specific actor.
    self_peer_addr: ActorAddress,
    /// Per-peer relay URLs published by the `MetadataActor`, read on the dial path
    /// (the egress can't block to `ask` the actor).
    relay_mirror: RelayMirror,
    /// The directory's converged actor→host view, published by the `DirectoryActor`.
    /// Read for the `directory_route_count` snapshot field (observability only).
    route_view: RouteView,
    /// The actors' shared outbound queue; drained by the engine-hosted pump.
    outbox: Outbox,
}

impl IrohDriver {
    /// Create a new iroh driver running on a caller-supplied swactor engine.
    ///
    /// The driver schedules all background work — accept loop, reads, dials,
    /// writes, retries — through `engine` and validates that it provides the
    /// task and native I/O capabilities before any endpoint or background work
    /// created (ENGINE_SPEC.md).
    ///
    /// Endpoint construction runs as an engine-hosted task; this constructor
    /// blocks on a synchronous channel until the endpoint is bound (or fails),
    /// so callers need not enter or possess the raw substrate runtime
    /// (ENGINE_SPEC.md).
    pub fn with_engine(
        engine: EngineHandle,
        config: IrohDriverConfig,
    ) -> Result<Self, Box<dyn std::error::Error>> {
        Self::build(engine, config)
    }

    /// Shared constructor body.
    ///
    /// `relay_mode` is passed directly to the endpoint. Custom relays remain
    /// supported as endpoint configuration; this driver no longer starts relay
    /// servers itself.
    fn build(
        engine: EngineHandle,
        config: IrohDriverConfig,
    ) -> Result<Self, Box<dyn std::error::Error>> {
        // Validate engine capabilities before allocating any resources. The
        // driver needs task scheduling (spawn), the native I/O reactor (QUIC),
        // and timers (retry/backoff/timeout inside engine-hosted work). An
        // engine that cannot provide these is rejected before the endpoint
        // binds or background work starts (ENGINE_SPEC.md).
        engine.require(Capabilities {
            tasks: true,
            timers: true,
            io: true,
            ..Capabilities::TASKS_ONLY
        })?;

        let effective_relay_mode = config.relay_mode;
        let configured_relay_url = match &effective_relay_mode {
            RelayMode::Custom(relay_map) => relay_map.urls::<Vec<_>>().into_iter().next(),
            _ => None,
        };
        let custom_relay = matches!(&effective_relay_mode, RelayMode::Custom(_));

        // Bind the endpoint inside an engine-hosted task. The result is
        // delivered through a synchronous channel so this constructor blocks
        // only on a std recv — never on a tokio block_on and never requiring
        // the caller to enter the raw substrate runtime.
        let additional_alpns = config.additional_alpns;
        let secret_key = config.secret_key;
        let (endpoint_tx, endpoint_rx) = std::sync::mpsc::channel::<Result<Endpoint, String>>();
        engine.spawn(async move {
            let mut all_alpns = vec![ALPN.to_vec()];
            all_alpns.extend(additional_alpns);
            let mut builder = Endpoint::builder(iroh::endpoint::presets::Minimal)
                .relay_mode(effective_relay_mode)
                .alpns(all_alpns);

            // Only relax relay-cert verification for a custom relay; Default /
            // Staging relays keep full WebPKI verification.
            if custom_relay {
                builder = builder.ca_roots_config(iroh::tls::CaRootsConfig::insecure_skip_verify());
            }

            if let Some(key) = secret_key {
                builder = builder.secret_key(key);
            }

            let result = builder.bind().await;
            let _ = endpoint_tx.send(result.map_err(|e| e.to_string()));
        });
        let endpoint = endpoint_rx
            .recv()
            .map_err(|e| -> Box<dyn std::error::Error> {
                format!("engine endpoint-bind task dropped: {e}").into()
            })?
            .map_err(|e| -> Box<dyn std::error::Error> { e.into() })?;
        let relay_url = endpoint
            .addr()
            .relay_urls()
            .next()
            .cloned()
            .or(configured_relay_url);

        // The driver's signing identity matches the iroh endpoint: both use
        // ed25519-dalek, so we reconstruct our Keypair from iroh's secret key.
        // (`config.node` carries the per-protocol configs the node binary already
        // unpacked to build the actors; the transport-only driver doesn't use it.)
        let iroh_secret = endpoint.secret_key().to_bytes();
        let keypair = Keypair::from_bytes(&iroh_secret);

        // Spawn background accept loop so incoming connections are never missed
        let accepted_conns: Arc<Mutex<Vec<(NodeId, Connection)>>> =
            Arc::new(Mutex::new(Vec::new()));
        let other_accepted_conns: Arc<Mutex<Vec<(NodeId, Vec<u8>, Connection)>>> =
            Arc::new(Mutex::new(Vec::new()));
        let datastream_reads: Arc<Mutex<Vec<DatastreamQuicRead>>> =
            Arc::new(Mutex::new(Vec::new()));
        let edge_events: Arc<Mutex<Vec<EdgeTransportEvent>>> = Arc::new(Mutex::new(Vec::new()));
        {
            let ep = endpoint.clone();
            let peer_auth = config.peer_auth.clone();
            let swim_buf = Arc::clone(&accepted_conns);
            let other_buf = Arc::clone(&other_accepted_conns);
            engine.spawn(async move {
                loop {
                    match ep.accept().await {
                        Some(incoming) => match incoming.await {
                            Ok(conn) => {
                                let remote_id = conn.remote_id();
                                let node_id = NodeId(*remote_id.as_bytes());
                                // Peer auth check
                                let allowed = match &peer_auth {
                                    None => true,
                                    Some(auth) => auth.lock().is_allowed(&node_id),
                                };
                                if !allowed {
                                    conn.close(0u32.into(), b"unauthorized");
                                    continue;
                                }
                                // Route by negotiated ALPN.
                                let negotiated_alpn = conn.alpn().to_vec();
                                if negotiated_alpn == ALPN {
                                    swim_buf.lock().push((node_id, conn));
                                } else {
                                    other_buf.lock().push((node_id, negotiated_alpn, conn));
                                }
                            }
                            Err(_) => {}
                        },
                        None => break, // endpoint closed
                    }
                }
            });
        }

        Ok(Self {
            keypair,
            endpoint,
            engine,
            conns: Arc::new(Mutex::new(ConnCache {
                connections: HashMap::new(),
                next_generation: 1,
                peer_relay_urls: HashMap::new(),
            })),
            peer_auth: config.peer_auth,
            pending_joins: Arc::new(Mutex::new(Vec::new())),
            dialing: Arc::new(Mutex::new(HashSet::new())),
            accepted_conns,
            other_accepted_conns,
            datastream_reads,
            edge_events,
            next_edge_stream_group: Arc::new(AtomicU64::new(1)),
            incoming: Arc::new(Mutex::new(Vec::new())),
            evict: Arc::new(Mutex::new(Vec::new())),
            join_statuses: Arc::new(Mutex::new(HashMap::new())),
            relay_url,
            actor_bridge: None,
        })
    }


    /// Clone the iroh endpoint for creating outbound connections.
    pub fn endpoint(&self) -> Endpoint {
        self.endpoint.clone()
    }

    /// Drain accepted connections whose negotiated ALPN exactly matches `alpn`.
    pub fn drain_accepted_for_alpn(&self, alpn: &[u8]) -> Vec<(NodeId, Connection)> {
        let mut pending = self.other_accepted_conns.lock();
        let mut keep = Vec::new();
        let mut drained = Vec::new();
        for (node, negotiated, conn) in pending.drain(..) {
            if negotiated == alpn {
                drained.push((node, conn));
            } else {
                keep.push((node, negotiated, conn));
            }
        }
        *pending = keep;
        drained
    }

    /// Drain non-SWIM, non-datastream connections kept for legacy stream users.
    pub fn drain_other_connections(&self) -> Vec<(NodeId, Connection)> {
        let mut pending = self.other_accepted_conns.lock();
        let mut keep = Vec::new();
        let mut drained = Vec::new();
        for (node, negotiated, conn) in pending.drain(..) {
            if negotiated == DATASTREAM_ALPN {
                keep.push((node, negotiated, conn));
            } else {
                drained.push((node, conn));
            }
        }
        *pending = keep;
        drained
    }

    /// Drain decoded datastream QUIC reads emitted by driver-owned adapter tasks.
    pub fn drain_datastream_reads(&self) -> Vec<DatastreamQuicRead> {
        self.datastream_reads.lock().drain(..).collect()
    }

    /// Start a driver-owned datastream subscription writer task.
    pub fn publish_datastream_subscription(
        &self,
        peer: EndpointAddr,
        header: DatastreamQuicHeader,
        subscription: datastream::DatastreamSubscription,
        idle_sleep: Duration,
    ) {
        spawn_subscription_writer(
            &self.engine,
            self.endpoint.clone(),
            peer,
            header,
            subscription,
            idle_sleep,
        );
    }

    /// Return a cloneable logical datastream transport handle for publisher actors.
    pub fn datastream_publish_handle(&self) -> DatastreamPublishHandle {
        DatastreamPublishHandle {
            engine: self.engine.clone(),
            endpoint: self.endpoint.clone(),
        }
    }

    /// Drain logical edge transport events emitted by driver-owned byte pumps.
    pub fn drain_edge_events(&self) -> Vec<EdgeTransportEvent> {
        self.edge_events.lock().drain(..).collect()
    }

    /// Start a driver-owned EDGE_ALPN send pump and return its logical byte input handle.
    pub fn spawn_edge_send_pump(
        &self,
        peer: EndpointAddr,
        edge_id: u64,
    ) -> Result<EdgeSendHandle, String> {
        spawn_edge_sender_task(self.engine.clone(), self.endpoint.clone(), peer, edge_id)
    }

    /// The node's identity.
    pub fn node_id(&self) -> NodeId {
        self.keypair.node_id()
    }

    /// The endpoint's current relay/direct advertised address.
    ///
    /// Starts from Iroh's live endpoint address, which includes the current
    /// home relay when one is available, then merges normalized direct socket
    /// addresses. For sockets bound to `0.0.0.0`, emits one address per
    /// discovered LAN IP so that peers on the same network can connect
    /// directly. IPv6 unspecified is mapped to localhost.
    pub fn endpoint_addr(&self) -> EndpointAddr {
        let mut addr = self.endpoint.addr();
        if addr.relay_urls().next().is_none() {
            if let Some(relay) = self.relay_url.clone() {
                addr = addr.with_relay_url(relay);
            }
        }
        for sa in self.direct_addresses() {
            addr = addr.with_ip_addr(sa);
        }
        addr
    }

    /// Compute direct socket addresses from bound sockets + LAN discovery.
    ///
    /// For sockets bound to `0.0.0.0`, emits one `SocketAddr` per discovered
    /// LAN IP using the bound port. Specific-IP binds are kept as-is.
    pub fn direct_addresses(&self) -> Vec<SocketAddr> {
        let lan_ips = discover_lan_ips();
        let mut addrs = Vec::new();
        for sock in self.endpoint.bound_sockets() {
            match sock.ip() {
                IpAddr::V4(ip) if ip.is_unspecified() => {
                    // Emit one address per discovered LAN IP
                    for lip in &lan_ips {
                        if lip.is_ipv4() {
                            addrs.push(SocketAddr::new(*lip, sock.port()));
                        }
                    }
                    // Also include localhost for same-host connectivity
                    addrs.push(SocketAddr::new(
                        IpAddr::V4(std::net::Ipv4Addr::LOCALHOST),
                        sock.port(),
                    ));
                }
                IpAddr::V6(ip) if ip.is_unspecified() => {
                    addrs.push(SocketAddr::new(
                        IpAddr::V6(std::net::Ipv6Addr::LOCALHOST),
                        sock.port(),
                    ));
                }
                _ => {
                    addrs.push(sock);
                }
            }
        }
        addrs
    }

    /// Sign a host claim for a locally-spawned actor, to hand to the
    /// `DirectoryActor` (`DirectoryIn::Register`) so peers learn this node hosts
    /// it. The driver holds the same ed25519 identity as the iroh endpoint, so
    /// the signed [`DirectoryEntry`](distribution::types::DirectoryEntry) verifies
    /// against this node's `NodeId`.
    pub fn register_actor(
        &self,
        actor_addr: ActorAddress,
        generation: u64,
    ) -> distribution::types::DirectoryEntry {
        self.keypair.sign_directory_entry(actor_addr, generation)
    }

    /// Capture the driver-owned slice of the node's observable state: identity,
    /// listen address, and the directory route-view extent. The core node no
    /// longer polls this (its telemetry flows over the datastream), so this is
    /// kept as a convenience over [`listen_addr`](Self::listen_addr) and
    /// [`directory_route_count`](Self::directory_route_count).
    pub fn snapshot(&self) -> DistributionNodeSnapshot {
        let mut snap = DistributionNodeSnapshot::empty(self.node_id());
        snap.listen_addr = Some(self.listen_addr());
        snap.directory_route_count = self.directory_route_count();
        snap
    }

    /// This node's listen / endpoint address. `endpoint.id()` is synchronous, so
    /// no runtime bridge is needed.
    pub fn listen_addr(&self) -> String {
        format!("{}", self.endpoint.id())
    }

    /// The number of actor→host routes this node currently knows — the converged
    /// directory `RouteView` extent. The view lives in the `DirectoryActor`; the
    /// driver holds a read-mirror of it, so report the mirror's length.
    pub fn directory_route_count(&self) -> usize {
        self.actor_bridge
            .as_ref()
            .and_then(|b| b.route_view.read().ok().map(|v| v.len()))
            .unwrap_or(0)
    }

    /// This node's location cache: every directory route whose host is a *remote*
    /// peer — the `(actor, host)` locations the node has learned in order to route
    /// across the network. Read off the same directory `RouteView` mirror as
    /// [`directory_route_count`](Self::directory_route_count), but filtered to
    /// peer-hosted actors: a node never needs to "cache" the location of an actor
    /// it hosts itself, so self-hosted routes are excluded. This is the honest
    /// `dist.state.cache_*` source, distinct from the all-routes count above.
    pub fn location_cache_entries(&self) -> Vec<(ActorAddress, NodeId)> {
        let self_id = self.node_id();
        self.actor_bridge
            .as_ref()
            .and_then(|b| {
                b.route_view.read().ok().map(|view| {
                    let mut entries: Vec<(ActorAddress, NodeId)> = view
                        .iter()
                        .filter(|(_, host)| **host != self_id)
                        .map(|(actor, host)| (*actor, *host))
                        .collect();
                    // Stable order so observers don't reshuffle each tick.
                    entries.sort_by(|a, b| a.0.0.cmp(&b.0.0));
                    entries
                })
            })
            .unwrap_or_default()
    }

    /// Get a snapshot of all join statuses.
    pub fn join_statuses(&self) -> HashMap<NodeId, JoinStatus> {
        self.join_statuses.lock().clone()
    }

    /// Clear join statuses for the given node IDs (e.g. peers that are now alive).
    pub fn clear_join_statuses(&self, node_ids: &[NodeId]) {
        let mut map = self.join_statuses.lock();
        for id in node_ids {
            map.remove(id);
        }
    }

    /// Clear a single join status entry.
    pub fn clear_join_status(&self, node_id: &NodeId) {
        self.join_statuses.lock().remove(node_id);
    }

    /// Join a cluster by connecting to seed nodes via iroh.
    ///
    /// Each seed is identified by its `EndpointAddr` (public key + optional
    /// direct addresses). Connect+send is spawned as a background task so
    /// that the peer can accept the connection during its `recv()` cycle.
    /// Results are collected in the next `recv()` call.
    pub fn join(&self, seeds: &[EndpointAddr]) {
        for seed_addr in seeds {
            // Store relay URL for future reconnection, and discard any cached
            // control connection iroh already reports closed before re-issuing
            // the semantic join request.
            let seed_node_id = NodeId(*seed_addr.id.as_bytes());
            {
                let mut cache = self.conns.lock();
                if let Some(relay) = seed_addr.relay_urls().next() {
                    cache.peer_relay_urls.insert(seed_node_id, relay.clone());
                }
                if cache
                    .connections
                    .get(&seed_node_id)
                    .is_some_and(|cached| cached.conn.close_reason().is_some())
                {
                    cache.connections.remove(&seed_node_id);
                }
            }
            // Enrich the seed addr with a cached relay URL if it doesn't have
            // one. The re-peer flow sends only a bare public key because
            // metadata (including relay URL) is stripped when a node is
            // declared dead. Without a relay URL iroh cannot reach the peer
            // through NAT.
            let enriched = if seed_addr.relay_urls().next().is_none() {
                let cached_relay = self
                    .conns
                    .lock()
                    .peer_relay_urls
                    .get(&seed_node_id)
                    .cloned();
                if let Some(relay) = cached_relay.or_else(|| self.home_relay_url()) {
                    seed_addr.clone().with_relay_url(relay)
                } else {
                    seed_addr.clone()
                }
            } else {
                seed_addr.clone()
            };
            self.spawn_join_request(enriched);
        }
    }

    fn spawn_join_request(&self, seed_addr: EndpointAddr) {
        let msg = JoinRequest {
            from: self.node_id(),
        };
        let payload = serde_json::to_vec(&msg).expect("serialize JoinRequest");
        let tag = <JoinRequest as swactor_transport::NetworkMessage>::type_tag();
        let endpoint = self.endpoint.clone();
        let seed_node_id = NodeId(*seed_addr.id.as_bytes());
        let pending = Arc::clone(&self.pending_joins);
        let statuses = Arc::clone(&self.join_statuses);

        let has_relay = seed_addr.relay_urls().next().is_some();
        let direct_addr_count = seed_addr.ip_addrs().count();
        let has_direct = direct_addr_count > 0;

        let engine = self.engine.clone();
        self.engine.spawn(async move {
            let mut delay = Duration::from_secs(2);
            let max_delay = Duration::from_secs(30);
            let max_attempts: u32 = 5;
            let per_attempt_timeout = Duration::from_secs(10);

            for attempt in 1..=max_attempts {
                if attempt > 1 {
                    engine.timer(delay).await;
                    delay = (delay * 2).min(max_delay);
                }

                // Update status: Connecting
                {
                    let mut map = statuses.lock();
                    map.insert(
                        seed_node_id,
                        JoinStatus {
                            phase: JoinPhase::Connecting {
                                attempt,
                                max_attempts,
                            },
                            has_relay,
                            has_direct,
                            direct_addr_count,
                            updated_at: engine.now().to_instant(),
                        },
                    );
                }

                let connect_result = engine.timeout(
                    per_attempt_timeout,
                    endpoint.connect(seed_addr.clone(), ALPN),
                )
                .await;

                match connect_result {
                    Ok(Ok(conn)) => {
                        // Update status: Sending
                        {
                            let mut map = statuses.lock();
                            map.insert(
                                seed_node_id,
                                JoinStatus {
                                    phase: JoinPhase::Sending {
                                        attempt,
                                        max_attempts,
                                    },
                                    has_relay,
                                    has_direct,
                                    direct_addr_count,
                                    updated_at: engine.now().to_instant(),
                                },
                            );
                        }

                        let send_result: Result<(), String> = async {
                            let mut send = conn.open_uni().await.map_err(|e| e.to_string())?;
                            // Frame format must match `read_message`: the 32-byte
                            // dest precedes the tag. A JoinRequest is gossip to the
                            // seed, so its dest is the seed's peer-mailbox (the
                            // receiver routes it by tag).
                            let dest = peer_addr(seed_node_id);
                            let tag_len = (tag.len() as u32).to_be_bytes();
                            send.write_all(&dest.0).await.map_err(|e| e.to_string())?;
                            send.write_all(&tag_len).await.map_err(|e| e.to_string())?;
                            send.write_all(tag.as_bytes())
                                .await
                                .map_err(|e| e.to_string())?;
                            send.write_all(&payload).await.map_err(|e| e.to_string())?;
                            send.finish().map_err(|e| e.to_string())?;
                            Ok(())
                        }
                        .await;

                        match send_result {
                            Ok(()) => {
                                // Update status: Sent
                                {
                                    let mut map = statuses.lock();
                                    map.insert(
                                        seed_node_id,
                                        JoinStatus {
                                            phase: JoinPhase::Sent,
                                            has_relay,
                                            has_direct,
                                            direct_addr_count,
                                            updated_at: engine.now().to_instant(),
                                        },
                                    );
                                }
                                pending.lock().push(JoinResult {
                                    node_id: seed_node_id,
                                    conn,
                                });
                                return;
                            }
                            Err(_) => {
                                continue;
                            }
                        }
                    }
                    Ok(Err(_)) => {
                        continue;
                    }
                    Err(_) => {
                        continue;
                    }
                }
            }
            // Update status: Failed
            {
                let mut map = statuses.lock();
                map.insert(
                    seed_node_id,
                    JoinStatus {
                        phase: JoinPhase::Failed {
                            error: "all attempts exhausted".into(),
                        },
                        has_relay,
                        has_direct,
                        direct_addr_count,
                        updated_at: engine.now().to_instant(),
                    },
                );
            }
        });
    }

    // ─── Actor bridge: iroh ⇄ swactor runtime ─────────────────────────

    /// Install the actor-bridge wiring so the driver shuttles frames between iroh
    /// and the swactor runtime — the seam by which the protocol actors send and
    /// receive over iroh. Frame progression is driven by the engine-hosted
    /// adapter pump ([`Self::install_actor_bridge_pump`]).
    pub fn enable_actor_bridge(
        &mut self,
        rt: Arc<Runtime>,
        codec: Arc<CodecRegistry>,
        routes: HashMap<String, ActorAddress>,
        swim_addr: ActorAddress,
        relay_mirror: RelayMirror,
        route_view: RouteView,
        outbox: Outbox,
    ) {
        let self_peer_addr = peer_addr(self.node_id());
        self.actor_bridge = Some(Arc::new(ActorBridge {
            rt,
            codec,
            routes,
            swim_addr,
            self_peer_addr,
            relay_mirror,
            route_view,
            outbox,
        }));
    }

    /// Relay URL configured or exposed by the bound endpoint, if any.
    pub fn relay_url(&self) -> Option<&str> {
        self.relay_url.as_ref().map(|url| url.as_str())
    }

    /// The endpoint's live or configured home relay URL, if any.
    pub fn home_relay_url(&self) -> Option<iroh::RelayUrl> {
        self.endpoint
            .addr()
            .relay_urls()
            .next()
            .cloned()
            .or_else(|| self.relay_url.clone())
    }

    /// Async teardown for the unified driver loop, which runs on a tokio worker
    /// where `block_on` would panic. Mirrors [`Self::shutdown`] without blocking.
    pub async fn close(&self) {
        self.endpoint.close().await;
    }

    /// Shut down the driver by closing the iroh endpoint.
    ///
    /// The close runs as an engine-hosted task; this method blocks on a
    /// synchronous channel until it completes, so it can be called from any
    /// non-async thread without entering or possessing the raw substrate
    /// runtime. The node's driver loop uses [`Self::close`] instead.
    pub fn shutdown(&self) {
        let (tx, rx) = std::sync::mpsc::channel();
        let endpoint = self.endpoint.clone();
        self.engine.spawn(async move {
            endpoint.close().await;
            let _ = tx.send(());
        });
        let _ = rx.recv();
    }

    /// Install engine-hosted interval tasks that drive adapter progression
    /// (actor-bridge ingress/egress, datastream ingress, edge ingress). After
    /// this call, the application must not manually pump these adapters
    /// (ENGINE_SPEC.md). Progression is scheduled on the engine the
    /// driver already stores; a bound driver does not accept an unrelated
    /// execution engine (ENGINE_SPEC.md).
    pub fn install_actor_bridge_pump(&self, period: Duration) {
        let pump = AdapterPump {
            engine: self.engine.clone(),
            endpoint: self.endpoint.clone(),
            conns: Arc::clone(&self.conns),
            incoming: Arc::clone(&self.incoming),
            evict: Arc::clone(&self.evict),
            pending_joins: Arc::clone(&self.pending_joins),
            accepted_conns: Arc::clone(&self.accepted_conns),
            other_accepted_conns: Arc::clone(&self.other_accepted_conns),
            datastream_reads: Arc::clone(&self.datastream_reads),
            edge_events: Arc::clone(&self.edge_events),
            next_edge_stream_group: Arc::clone(&self.next_edge_stream_group),
            dialing: Arc::clone(&self.dialing),
            peer_auth: self.peer_auth.clone(),
            relay_url: self.relay_url.clone(),
            bridge: Arc::clone(self.actor_bridge.as_ref().expect("bridge installed")),
        };
        let engine = self.engine.clone();
        engine.clone().spawn(async move {
            let mut interval = engine.interval(period);
            loop {
                (&mut interval).await;
                pump.run_pump_cycle();
            }
        });
    }
}

// ─── Engine-hosted adapter pump ─────────────────────────────────────────────

/// Cloneable handles for the engine-hosted adapter pump task.
///
/// Held inside the spawned engine task installed by
/// [`IrohDriver::install_actor_bridge_pump`]; each pump cycle folds completed
/// joins/accepts into the connection cache, decodes inbound frames into actor
/// messages, drains the actors' outbound queue onto the wire, and drives the
/// driver-owned datastream/edge ingress adapters. All shared state is behind
/// `Arc<Mutex<…>>` / `Arc<AtomicU64>`, so the pump needs only `&self`.
#[derive(Clone)]
struct AdapterPump {
    engine: EngineHandle,
    endpoint: Endpoint,
    conns: Arc<Mutex<ConnCache>>,
    incoming: Arc<Mutex<Vec<(ActorAddress, String, Vec<u8>, NodeId)>>>,
    evict: Arc<Mutex<Vec<FailedConnection>>>,
    pending_joins: Arc<Mutex<Vec<JoinResult>>>,
    accepted_conns: Arc<Mutex<Vec<(NodeId, Connection)>>>,
    other_accepted_conns: Arc<Mutex<Vec<(NodeId, Vec<u8>, Connection)>>>,
    datastream_reads: Arc<Mutex<Vec<DatastreamQuicRead>>>,
    edge_events: Arc<Mutex<Vec<EdgeTransportEvent>>>,
    next_edge_stream_group: Arc<AtomicU64>,
    dialing: Arc<Mutex<HashSet<NodeId>>>,
    peer_auth: Option<Arc<Mutex<PeerAllowList>>>,
    relay_url: Option<iroh::RelayUrl>,
    bridge: Arc<ActorBridge>,
}

impl AdapterPump {
    /// Fold completed background dials/joins and accepted connections into the
    /// connection cache (spawning readers), then evict + re-dial connections
    /// whose fire-and-forget send failed.
    fn fold_connections(&self) {
        // Fold completed background join connections into the cache (+ read).
        let joins: Vec<JoinResult> = self.pending_joins.lock().drain(..).collect();
        for result in joins {
            self.cache_connection(result.node_id, result.conn);
        }

        // Fold connections accepted from remote peers into the cache (+ read).
        let accepted: Vec<(NodeId, Connection)> = self.accepted_conns.lock().drain(..).collect();
        for (node_id, conn) in accepted {
            self.cache_connection(node_id, conn);
        }

        // Evict only the connection generation whose fire-and-forget send
        // failed; a delayed failure from an old connection must not remove its
        // replacement. Kick a fresh dial for the current failed generation.
        let evicted: Vec<FailedConnection> = self.evict.lock().drain(..).collect();
        for failed in evicted {
            let should_redial = {
                let mut cache = self.conns.lock();
                let still_current = cache
                    .connections
                    .get(&failed.node_id)
                    .is_some_and(|cached| cached.generation == failed.generation);
                if still_current {
                    cache.connections.remove(&failed.node_id);
                    true
                } else {
                    false
                }
            };
            if should_redial {
                if let Ok(key) = PublicKey::from_bytes(&failed.node_id.0) {
                    let _ = self.get_or_connect(failed.node_id, key);
                }
            }
        }
    }

    /// Cache a connection and start reading from it.
    fn cache_connection(&self, node_id: NodeId, conn: Connection) {
        let generation = {
            let mut cache = self.conns.lock();
            let generation = cache.next_generation;
            cache.next_generation = cache.next_generation.wrapping_add(1).max(1);
            cache
                .connections
                .insert(node_id, CachedConnection { generation, conn: conn.clone() });
            generation
        };
        self.spawn_reader(node_id, generation, conn);
    }

    /// Ingress: fold new connections, then decode each received frame and
    /// `deliver_raw` it to the right actor. Pure-sync.
    ///
    /// Two kinds of frame arrive on one stream, told apart by the wire `dest`
    /// (`DIRECTORY.md` §5):
    ///  - **Gossip to a well-known protocol actor** was addressed to this node's
    ///    peer-mailbox (`dest == peer_addr(self)`); it is routed by `type_tag` to
    ///    the local actor that owns it (SWIM / registry / metadata / directory).
    ///  - **An application message** routed by the directory carries the target
    ///    actor's own address as `dest`; it is delivered straight into that actor's
    ///    mailbox. A `dest` for an actor that isn't local here drops best-effort.
    fn pump_inbound(&self) {
        self.fold_connections();
        let messages: Vec<(ActorAddress, String, Vec<u8>, NodeId)> =
            self.incoming.lock().drain(..).collect();
        for (dest, tag, payload, _from) in messages {
            let Ok(boxed) = self.bridge.codec.decode(&tag, &payload) else {
                continue;
            };
            if dest == self.bridge.self_peer_addr {
                // Gossip: route by tag to the protocol actor that owns it.
                if let Some(&addr) = self.bridge.routes.get(&tag) {
                    let _ = self.bridge.rt.deliver_raw(addr, boxed);
                }
            } else {
                // Application message: deliver straight to the addressed actor.
                let _ = self.bridge.rt.deliver_raw(dest, boxed);
            }
        }
    }

    /// Drain the actors' outbound queue and submit each current frame to iroh
    /// exactly once. A connection cache miss starts or continues a background
    /// dial and drops that frame best-effort; stream writes remain
    /// fire-and-forget on the tokio pool, so this never blocks.
    fn drain_outbox(&self) {
        let frames: Vec<OutFrame> = self.bridge.outbox.lock().unwrap().drain(..).collect();
        for frame in frames {
            self.send_wire(frame);
        }
    }

    /// Write an already-encoded frame over iroh, fire-and-forget. A connection
    /// cache miss starts or continues a background dial and drops the current
    /// frame best-effort. A stream-write failure evicts the failed connection,
    /// drops the current frame, and, for SWIM frames only, delivers
    /// `SendFailed { to }` to the SwimActor (§4.3).
    fn send_wire(&self, frame: OutFrame) {
        let target_key = match PublicKey::from_bytes(&frame.to.0) {
            Ok(k) => k,
            Err(_) => return,
        };
        let cached = match self.get_or_connect(frame.to, target_key) {
            Ok(cached) => cached,
            Err(_) => return,
        };
        let generation = cached.generation;
        let conn = cached.conn;
        let OutFrame {
            to,
            dest,
            type_tag,
            payload,
        } = frame;
        let evict = Arc::clone(&self.evict);
        // Only SWIM frames feed failure detection via SendFailed; gossip is
        // best-effort and just drops.
        let send_failed = if is_swim_tag(&type_tag) {
            Some((self.bridge.rt.clone(), self.bridge.swim_addr))
        } else {
            None
        };
        self.engine.spawn(async move {
            let result: Result<(), Box<dyn std::error::Error>> = async {
                let mut send = conn.open_uni().await?;
                write_message(&mut send, dest, type_tag.as_bytes(), &payload).await?;
                send.finish()?;
                Ok(())
            }
            .await;
            if result.is_err() {
                evict.lock().push(FailedConnection {
                    node_id: to,
                    generation,
                });
                if let Some((rt, swim_addr)) = send_failed {
                    let _ = rt.deliver_raw(swim_addr, Box::new(SwimIn::SendFailed { to }));
                }
            }
        });
    }

    /// Return an open cached connection. On a cache miss or closed entry, start
    /// or continue a background dial and report that the current frame must be
    /// dropped best-effort rather than retained by the driver.
    fn get_or_connect(
        &self,
        node_id: NodeId,
        key: PublicKey,
    ) -> Result<CachedConnection, Box<dyn std::error::Error>> {
        // Defense in depth: check peer auth before connecting
        if !self.is_peer_allowed(&node_id) {
            return Err(format!(
                "peer {} not in allow-list",
                swactor_transport::hex_encode(&node_id.0[..4])
            )
            .into());
        }

        // Check for cached connection that's still open
        {
            let mut cache = self.conns.lock();
            if let Some(cached) = cache.connections.get(&node_id) {
                if cached.conn.close_reason().is_none() {
                    return Ok(cached.clone());
                }
                // Connection closed, remove it
                cache.connections.remove(&node_id);
            }
        }

        // Resolve relay URL: explicit cache → MetadataActor mirror → own home
        // relay.
        let relay = {
            let cached_relay = self.conns.lock().peer_relay_urls.get(&node_id).cloned();
            if let Some(r) = cached_relay {
                Some(r)
            } else if let Some(r) = self
                .bridge
                .relay_mirror
                .read()
                .ok()
                .and_then(|view| view.get(&node_id).cloned())
                .and_then(|s| s.parse::<iroh::RelayUrl>().ok())
            {
                Some(r)
            } else if let Some(r) = self.home_relay_url() {
                Some(r)
            } else {
                None
            }
        };

        // Hand the dial to a background task instead of blocking the SWIM
        // pump. The connection lands in `pending_joins` and is folded into the
        // cache by the next pump cycle; this send is dropped best-effort and
        // SWIM re-sends over the cached connection on a later tick.
        let dial_addr = match &relay {
            Some(r) => EndpointAddr::new(key).with_relay_url(r.clone()),
            None => EndpointAddr::new(key),
        };
        self.spawn_connect(node_id, dial_addr);
        Err("connection not ready; background dial started".into())
    }

    /// Dial `node_id` in the background (never blocks the SWIM pump),
    /// mirroring `spawn_join_request`'s retry/backoff but without sending a
    /// join payload. At most one dial runs per peer at a time (`dialing`
    /// guards re-entry); on success the connection is queued in
    /// `pending_joins` for the next pump cycle to cache, and the in-flight
    /// flag is always cleared when the task ends.
    fn spawn_connect(&self, node_id: NodeId, dial_addr: EndpointAddr) {
        if !self.dialing.lock().insert(node_id) {
            return; // a dial is already in flight for this peer
        }
        let endpoint = self.endpoint.clone();
        let pending = Arc::clone(&self.pending_joins);
        let dialing = Arc::clone(&self.dialing);
        let engine = self.engine.clone();
        self.engine.spawn(async move {
            const ATTEMPTS: u32 = 3;
            let per_attempt_timeout = Duration::from_secs(10);
            for attempt in 1..=ATTEMPTS {
                let result = engine.timeout(
                    per_attempt_timeout,
                    endpoint.connect(dial_addr.clone(), ALPN),
                )
                .await;
                if let Ok(Ok(conn)) = result {
                    pending.lock().push(JoinResult { node_id, conn });
                    break;
                }
                if attempt < ATTEMPTS {
                    let backoff = if attempt == 1 { 200 } else { 600 };
                    engine.timer(Duration::from_millis(backoff)).await;
                }
            }
            dialing.lock().remove(&node_id);
        });
    }

    /// Spawn a persistent reader task for `conn` that pushes each valid framed
    /// message into the shared `incoming` queue. A malformed or truncated
    /// unidirectional stream is dropped without destroying the connection; an
    /// accept failure queues generation-aware eviction for the closed
    /// connection.
    fn spawn_reader(&self, node_id: NodeId, generation: u64, conn: Connection) {
        let incoming = Arc::clone(&self.incoming);
        let evict = Arc::clone(&self.evict);
        self.engine.spawn(async move {
            loop {
                match conn.accept_uni().await {
                    Ok(mut recv) => match read_message(&mut recv).await {
                        Ok((dest, tag, payload)) => {
                            incoming.lock().push((dest, tag, payload, node_id));
                        }
                        Err(_) => continue,
                    },
                    Err(_) => {
                        evict.lock().push(FailedConnection {
                            node_id,
                            generation,
                        });
                        break;
                    }
                }
            }
        });
    }

    /// Claim accepted datastream connections and read them inside driver-owned
    /// tasks.
    fn pump_datastream_ingress(&self) {
        let drained = {
            let mut pending = self.other_accepted_conns.lock();
            let mut keep = Vec::new();
            let mut drained = Vec::new();
            for (node, negotiated, conn) in pending.drain(..) {
                if negotiated == DATASTREAM_ALPN {
                    drained.push((node, conn));
                } else {
                    keep.push((node, negotiated, conn));
                }
            }
            *pending = keep;
            drained
        };
        for (_node, conn) in drained {
            let reads = Arc::clone(&self.datastream_reads);
            self.engine.spawn(async move {
                while let Ok(recv) = conn.accept_uni().await {
                    match read_events_from_stream(recv).await {
                        Ok(read) => reads.lock().push(read),
                        Err(_) => break,
                    }
                }
            });
        }
    }

    /// Claim accepted MVP edge connections and read opaque edge bytes inside
    /// the driver.
    fn pump_edge_ingress(&self) {
        let drained = {
            let mut pending = self.other_accepted_conns.lock();
            let mut keep = Vec::new();
            let mut drained = Vec::new();
            for (node, negotiated, conn) in pending.drain(..) {
                if negotiated == EDGE_ALPN {
                    drained.push((node, conn));
                } else {
                    keep.push((node, negotiated, conn));
                }
            }
            *pending = keep;
            drained
        };
        for (node, conn) in drained {
            let stream_group = self
                .next_edge_stream_group
                .fetch_add(1, Ordering::Relaxed)
                .max(1);
            spawn_edge_recv_pump(
                self.engine.clone(),
                conn,
                node,
                Arc::clone(&self.edge_events),
                stream_group,
            );
        }
    }

    fn is_peer_allowed(&self, node_id: &NodeId) -> bool {
        match &self.peer_auth {
            None => true,
            Some(auth) => auth.lock().is_allowed(node_id),
        }
    }

    /// The endpoint's live or configured home relay URL, if any.
    fn home_relay_url(&self) -> Option<iroh::RelayUrl> {
        self.endpoint
            .addr()
            .relay_urls()
            .next()
            .cloned()
            .or_else(|| self.relay_url.clone())
    }

    /// One full pump cycle: fold connections, drain inbound/outbound, drive
    /// the datastream and edge ingress adapters.
    fn run_pump_cycle(&self) {
        self.fold_connections();
        self.pump_inbound();
        self.drain_outbox();
        self.pump_datastream_ingress();
        self.pump_edge_ingress();
    }
}

// ─── Helpers ─────────────────────────────────────────────────────────────────

/// Whether a wire `type_tag` is a SWIM message — the frames whose write failure
/// must feed failure detection (`SendFailed`). Gossip frames are best-effort.
fn is_swim_tag(tag: &str) -> bool {
    matches!(
        tag,
        "swactor_dist::Ping"
            | "swactor_dist::Ack"
            | "swactor_dist::PingReq"
            | "swactor_dist::IndirectAck"
            | "swactor_dist::JoinRequest"
            | "swactor_dist::JoinResponse"
    )
}

// ─── Wire Framing Over QUIC Streams ─────────────────────────────────────────

/// Write a tagged message to a QUIC send stream.
///
/// Frame format: `[32B dest][4B tag_len][tag_bytes][payload_bytes]`. `dest` is the
/// destination actor address (`DIRECTORY.md` §5): the peer's mailbox for gossip,
/// or a specific actor for a directory-routed application message.
async fn write_message(
    send: &mut iroh::endpoint::SendStream,
    dest: ActorAddress,
    tag: &[u8],
    payload: &[u8],
) -> Result<(), Box<dyn std::error::Error>> {
    let tag_len = (tag.len() as u32).to_be_bytes();
    send.write_all(&dest.0).await?;
    send.write_all(&tag_len).await?;
    send.write_all(tag).await?;
    send.write_all(payload).await?;
    Ok(())
}

/// Read a tagged message from a QUIC recv stream.
///
/// Returns `(dest, type_tag, payload)` (see [`write_message`] for the frame format).
async fn read_message(
    recv: &mut iroh::endpoint::RecvStream,
) -> Result<(ActorAddress, String, Vec<u8>), Box<dyn std::error::Error>> {
    let mut dest_buf = [0u8; 32];
    recv.read_exact(&mut dest_buf).await?;
    let dest = ActorAddress(dest_buf);

    let mut tag_len_buf = [0u8; 4];
    recv.read_exact(&mut tag_len_buf).await?;
    let tag_len = u32::from_be_bytes(tag_len_buf) as usize;

    if tag_len > 1024 {
        return Err("tag too large".into());
    }

    let mut tag_buf = vec![0u8; tag_len];
    recv.read_exact(&mut tag_buf).await?;
    let tag = String::from_utf8(tag_buf)?;

    let payload = recv.read_to_end(64 * 1024).await?;

    Ok((dest, tag, payload))
}